Banner Stands

Home

Resources

Sitemap

File Upload

Banner Stands

Banner Stands

Trade Show and Showroom Display Systems

The banner stand is a cost effective way of presenting graphics on a large area like trade show and showroom displays. It is eye-catching, lightweight, plus it's easy to install. We print our banners on polyester/vinyl fabric that is highly weather resistant, tear resistant but does not require a lot of maintenance.

FREE Banner Stand
Promo Flyer (7.5 MB)

• Single-sided Banner Stand

Description:
The single-sided banner stand has an aluminum base. The single foot in the center of the base swivels out for stabilizing the unit. A clamp top pulls the graphic from the base and hangs it in place on the top of the three section bungee corded pole.

Graphics Information:
Printed on polyester/vinyl fabric using high resolution inkjet solvent printer. Weather and tear resistant, and cleanable. Do you want to change your banner graphics in the future? Not a problem. Just ship back the stand and we will switch it out for you.

Specification, Dimensions & Cost:
Viewable graphic area: (Available in two sizes)
33.5" (width) x 79.0" (height) plus 0.5" bleed. = $195
48.0" (width) x 79.0" (height) plus 0.5" bleed. = $240
Leave all important information 3" below & above the top and bottom holders.
Setup Time: 5-15 minutes

Turn around time:
We can ship it on the same day after the artwork has been approved.

• Double-sided Banner Stand

Description:
The double-sided banner stand has an aluminum base. The single foot in the center of the base swivels out for stabilizing the unit. A clamp top pulls the graphic from the base and hangs it in place on the top of the three section bungee corded pole.

Specification, Dimensions & Cost:
Viewable graphic area:
x2 = 30.5" (width) x 75.0" (height) plus 0.5" bleed. = $280
Leave all important information 3" below & above the top and bottom holders.
Setup Time: 5-15 minutes

Turn around time:
We can ship it on the same day after the artwork has been approved.

• Back Wall Banner Stand

Description:
The back wall banner stand has an aluminum base. The feet located at the base stabilizes the unit. The clamp tops pull the graphics from the base and hang it in place on the top of the section bungee corded poles.

Specification, Dimensions & Cost:
Viewable graphic area: (Depends on type of unit)
Single-Sided: (Available in 2 sizes)
x3 = 33.5" (width) x 79.0" (height) plus 0.5" bleed.
x3 = 48" (width) x 79" (height) plus 0.5" bleed.
Double-Sided:
x3 = 30.5" (width) x 76" (height) plus 0.5" bleed.
Leave all important information 3" below & above the top and bottom holders.
Cost: Depends on the type and number of units ordered.

Setup Time: 5-15 minutes

Turn around time:
We can ship it on the same day after the artwork has been approved.

• X Banner Stand

Description:
The X Banner Stand is very lightweight, can easily be set up in 10 seconds and is very stable. The movable lower hook allows you to adjust the banner tension strength to be able to house multiple different banner sizes using the combination of
upper poles.

Specification, Dimensions & Cost:
Frame: Steel + FRP & Plastic
Viewable graphic area (adjustable):
23" (width) x 63.0" (height) plus 0.5" bleed = $70 OR
30" (width) x 70" (height) plus 0.5" bleed = $120
Weight: 7 lbs.

Setup Time: less than a minute.

Turn around time:
We can ship it on the same day after the artwork has been approved.

• Table Top Roll up Banner

Description:
The table top roll up banner is a mini version of the banner stands that can be installed on its own and can be propped up on any flat surface.

Graphics Information:
Printed on high quality paper with laser ink.

Specification & Dimensions:
Viewable graphic area:
10" (width) x 15" (height) + plus 0.5" bleed = $29

Setup Time: less than a minute.

Turn around time:
We can ship it on the same day after the artwork has been approved.